Transport Crate Build

Finally got off my butt yesterday and built some crates to transport the chickens to the processor (tomorrow). It was a little harder to get started than I expected because 10 days ago I cut the tip of my thumb really bad on the table saw. Hence I have been a little leery to use any saws at all much less its difficult to do anything without using your thumb. Anyhow, here is what I ended up with.

I had to do this job on the cheap cause I am broke. I had purchased the sheet of 7/16" OSB and four 2x4's a week or two ago when I had a few bucks. I was going to buy a bundle (50) of 1/4x1-1/2x48" lath for the slats but decided to use some leftover scraps of 5mm plywood I had from a previous job. I had 3 odd shaped pieces that I thought would be plenty but wound up short by a bunch and had to tear into a good sized 1/3 sheet of the same material. I was surprised by how many slats were needed for 3 crates.

The basic size is 24x32" so that I could get all 6 top and bottom pieces from a single sheet. For the 2x2 vertical supports I ripped a couple of the 2x4's in half and cut them 11-1/2" long (6 per crate). And the slats are 1-1/2" wide by 24" for the ends and 32" for the sides. There is about 5/8" gap between the bottom and the first slat so that I can hose them out and allow stuff to flow out. I also scabbed a couple of 2x2 on the bottom so that they can be stacked without hitting the hardware. Of course as usual I had to glue and screw everything. The slats are glued and stapled with two 1" staples on each vertical support.

I continued on the cheap with all the "hardware" by using stuff I already had laying around. The only thing I had to buy were the hinges and I opted to use one each instead of a pair and saved $5. The wood latch is just a piece of the slat plywood that pivots on a screw. And the handles are just some small pieces of rope with a knot on each end.

The paint was just to make hosing them out easier and make them last a little longer. OSB doesn't fare too well in the weather. All in all, not to bad of a job on a budget. The plastic crates available on the internet are ridiculously priced around $100 or so. I am taking about 22-24 chickens to the processor tomorrow so I figured that 3 crates would be enough as they should comfortably hold 8 chickens each.

Today I am withholding all food from the chickens to clean them out before processing. It was nice to have a break from moving the hoop house and feeding them. All I had to do was fill the water bucket. They kinda looked at me expectantly and were a little confused why I didn't move them to fresh grass. I hope the roosters enjoyed their last meal. I know I will enjoy my first chicken dinner this weekend.

Week 11 - Nearing the Finish Line

Wow the chickens have really filled in and are looking great. They are about the same size as my 2 year old layers. I am confident that I can finish off the roosters early which is a good thing because they are starting to crow, and peck each other more--and I don't have much feed left. I went ahead and bought one bag of scratch corn to help stretch the feed and to put a little fat on them.

Mr. Curious here is gonna be Mr. Chicken Dinner pretty quick. I can't believe they are only 10 weeks old.

Yesterday I was able to schedule a day to process the roosters. Mary at The Hen Connection recommended that I try Country Side Poultry Processing in Fruitland. The owner was very nice on the phone and their prices are pretty good, only $2.50 per chicken or $2.85 with a cryobag. I think the cryobag is worth the small additional costs so I will go with that. So this Friday, June 8th the roos will be taking a one way trip to the freezer. I will follow up with a post about how the processing went.

Now I need to get busy and build a few transportation crates to take them in. I am going to use the basic plan from APPPA but modified a little to get 3 crates out of a single sheet of plywood, two 2x4s and a bundle of lath. I will use a sheet of 7/16" OSB and paint the smooth side white to keep the top cool and the bottom easier to clean after use. I will just rip the sheet of OSB in half down the length and in thirds across it giving me 6 pieces just shy of 24x32", which should easily hold 8-10 chickens. I always rip 2x4's in half instead of buying 2x2's because they cost the same and I get 2 for the price of one and the 2x4s are better quality. I will cut them into 11 or 12" pieces for the vertical supports. I think that 6 per crate is enough, but may have to add more depending on the sturdiness of the lath. 4 pieces of lath across each side should be plenty.